Five Tips for Adjusting The Speed of Conveyor Line

Conveyor line, also known as assembly line, is a kind of industrial production method, which means that each production unit only focuses on handling a certain segment of work to improve work efficiency and output.

According to the conveying method of the assembly line, it can be roughly divided into seven types of assembly lines: belt assembly line, plate chain line, double speed chain, plug-in line, mesh belt line, suspension line and roller assembly line. Generally, it includes traction parts, load-bearing components, drive devices, tensioning devices, redirecting devices and supporting parts.

1. The deviation of the conveyor belt causes the edge to be pulled.

2. The belt tearing caused by impurities in the conveyed materials of the industrial assembly line. For coal ports, impurities in the conveyed materials are mainly due to poor coal quality. Large pieces of coal and various impurities in the raw coal, such as ironware, wooden sticks, etc., cause about 70-80% of the tearing. Therefore, ensuring the quality of the source coal is the key to preventing tearing.

3. Belt tearing caused by improper installation of belt conveyor auxiliary equipment. There are many auxiliary equipments in belt conveyor. The falling of liner, sharp iron adsorbed by iron remover and improper installation of sweeper may cause tearing and scraping of conveyor belt. Ordinary conveyor belt has no lateral protection structure and cannot prevent tearing.

4. Tearing of industrial conveyor belt caused by material blocking. The transfer chute is small, which can easily hinder the passage of materials and impurities and cause the conveyor belt to tear.

With the popularization of industrial assembly line in industrial production, conveyor line is a very common means of transportation in industrial production. Then modern conveyor line pays more attention to factors such as efficiency, service life and cost performance.

5. Belt tearing caused by imperfect structure of belt conveyor. Due to the imperfect structure of belt conveyor, the drop point of conveyor belt has a large drop, the relative speed of impurities in coal flow is large, the impact force is large, and sharp, hard and long impurities are easy to insert into the conveyor belt at the drop point, causing the conveyor belt to tear.